Custom Engraved Hand/Foot Print

Create a necklace with a babies hand or foot print. We use your ink print to engrave a meaningful pendant.

Online exclusive only

Composition

• 92.5 sterling silver

• 14K gold plating on sterling silver

Measurements

• 15mm disk

If you have an ink print ready follow these steps:

1. Take a photo directly above the hand/foot print image (keep in mind angled photos may distort your print and good lighting is important)

2. Email your photo to harmonyhandwrittenmessage@gmail.com

In the title of the email, please write as follows: (Your Order # and Your Name)
Example: #09065 Sam Smith

How to make your own ink print at home:
We suggest following either of these two options:

1. Safe Print Ink Kit on Amazon

2. Water-based or Tempura paint which are non-toxic and washable (available at most dollar stores and craft stores)
   

Amazon Kit Directions:

Follow the instructions provided with the Kit and follow up with emailing us a photo of the print after ordering your necklace.

Water based paint directions:

1. Start by making sure the hand/foot is clean

2. Gently dip the hand/foot in the paint

3. Gently press onto a sturdy piece of paper for a few seconds (we suggest card stock)
   You may wish to make more than one print to ensure you have one you really like.

4. Wash your hand/foot while you allow your prints to dry

5. Proceed with emailing your paw print image

Let us know of any concerns or questions you may have in the email provided above!